Select by MarTek Limited’s model numbers

If you are familiar with MarTek Limited’s product line, it may be easier to find the specific model you need by the model number. Below is the entire MarTek Limited product line categorized by type and model number.

Control Switch Operators:

The CS-01 is the most widely used product and has been the top seller.

Product Details

The Chicken Switch Model CS02 is now the new CS01.

Product Details

The CS-03 is very similar to the CS-01 but is designed for the Instrument Transformers, Inc (ITI) Series 95.

Product Details

The CS-04 is very similar to the CS-05 but is designed for the General Electric SBM and Westinghouse Type W-2.

Product Details

The CS-05 is specifically designed for the Electroswitch Series 20 control switch.

Product Details

PB-16The Model PB-16 is designed for universal applications that involve pushing a button.

Product Details

Breaker Operators:

AK13-on-breaker

The AK-11 is designed to work uniquely with GE AK low voltage circuit breakers.

Product Details

BBC-5

The BBC-5 is designed to work uniquely with ITE BBC low voltage circuit breakers.

Product Details

bl-30-lgThe Model BL-30 is designed to operate the TRIP/CLOSE lever on a Square D Bolt-Loc Switch.

Product Details

The Model DS-10 is designed to remotely operate the Trip and Close buttons on Westinghouse “DS” type breakers.

Product Details

The GEPB-1 is designed to operate the TRIP and CLOSE buttons on the GE Power Break circuit breaker.

Product Details

The GEPB-2 is designed to work uniquely with GE Power Break II low voltage circuit breakers.

Product Details

K20-Actuator

The K-15 (K-20) is designed to work uniquely with ABB or ITE K-Line low voltage circuit breakers.

Product Details

LA-12-Remote-Actuator

The LA-12 is designed to work uniquely with Siemens-Allis LA low voltage circuit breakers.

Product Details

The MDS-30 is designed to work uniquely with Cutler-Hammer Magnum DS low voltage circuit breakers.

Product Details

NT-20

The NT-20 is designed to work uniquely with Square D Masterpact NT low voltage circuit breakers.

Product Details

nw-20-lga

Model NW-20 is designed to work with Square D / Merlin Gerin MASTERPACT type ‘NW’ low voltage circuit breakers.

Product Details

The Model P-11 is designed to work exclusively with Square D low voltage “P-series” molded case circuit breakers.

Product Details

PB-16The Model PB-16 is designed for universal applications that involve pushing a button.

Product Details

The Model RL-12 is designed to work with Siemens/Allis-Chalmers “RL-series” of low voltage circuit breakers.

Product Details

The Model SACE-1 is designed to work with certain ABB low voltage insulated case circuit breakers.

Product Details

sace2-actuator

The Model SACE-2 is designed to work with certain ABB low voltage insulated case circuit breakers.

Product Details

The Model SBH-2 has been designed to operate the OPEN and CLOSE buttons on SiemensType SBH breakers.

Product Details

The Model SE-06 is designed to remotely operate the Trip and Close buttons on Square D Type “SE” breakers.

Product Details

The Model SPB-1 has been designed to operate the OPEN and CLOSE buttons on Cutler Hammer Type SPB breakers.

Product Details

The Model SPB-2 is similar to the SPB-1. The model required will depend on frame size and style of SPB breaker.

Product Details

The Model WAV-21 is designed to operate select GE WavePro breakers.

Product Details

The Model WL-01 is designed to work uniquely with Siemens WLS low voltage circuit breakers.

Product Details

Racking Devices:

The DSR1 portable remote racking device is designed specifically for use with DS and DSII circuit breakers.

Product Details

The VCPR portable remote racking device is designed specifically for use with Eaton Cutler-Hammer VCP-W.

Product Details

The SDR1 was designed in collaboration with Square D to remotely rack their Model 6 Closed Door Racking (CDR) motor control center buckets.

Product Details

The RLR1 portable remote racking device is designed specifically for use with Siemens/Allis-Chalmers “RL-series” circuit breakers.

Product Details

MCC Operators:

The ABL-1 fits Allen-Bradley Centerline disconnects with a small or medium size handle.

Product Details

The SDR1 was designed in collaboration with Square D to remotely rack their Model 6 Closed Door Racking (CDR) motor control center buckets.

Product Details

The SDL-6 was designed for the Square D Model 6 Disconnect Switch Operator.

Product Details

The SDL-6C was designed for the Square D Model 6 CDR Remote Disconnect Switch Operator.

Product Details

Coming Soon:

The ABL-2 was designed for the Allen Bradley Centerline Medium Voltage MCC Disconnect Swith Operator.

The ABL-3 was designed for the Allen Bradley Centerline LV Main Disconnect Switch Operator.

The CHL-1 was designed for the Remote Disconnect Switch for Cutler Hammer 2100 Series MCC’s (also works with Westinghouse 2100 and Westinghouse 5 Star MCC’s).

The SIL-3 was designed for the Remote Disconnect Switch Operator for Siemens Tiastar MCC’s.